ASSESSMENT OF RISK IN CONSUMER MANUFACTURING LOW TOXIC PLYWOOD
Abstract and keywords
Abstract (English):
Currently, the use of wood plate materials (WPM) in various industries is steadily increasing due to a number of technological and economic advantages. Along with this, there is the improvement of methods of manufacturing and materials used for this purpose. One of the most commonly types of glue used for production of plywood as one of the types of WPM are urea-formaldehyde resins. In the manufacture of adhesive compositions based on them possible to use a wide range of sorbents that provide a variety of improved technological properties, such as adhesive, and the finished plywood. One of these properties is the level of free formaldehyde emissions from finished plywood, which directly affects to the possibility of its using in different rooms and characterizes the level of consumer risks in its operation. Scientifically it proved possible to reduce the level of emission of free formaldehyde from finished plywood with using of natural zeolite clinoptilolite treated in weak pulsed magnetic fields (SIMP) and ultra-high frequency electromagnetic fields (EMF microwave), as a sorbent of urea-formaldehyde resin filler in the manufacture of plywood for general using. This study evaluated the level of consumer risks in the operation of plywood manufactured with sorbent activated in SIMP and microwave EMF. In this paper describes the main influencing factors as well as the possibility of reducing calculation errors in consumer risk shows the feasibility of using a simplified calculation of constant values while respecting the basic influencing factors. Calculations of changes in con-sumer risk for saples of plywood manufactured with using sorbents, activated in SIMP and EMF microwave were made, established decrease by 25 and 33 % respectively.

Keywords:
consumer risks, emission of formaldehyde, plywood, electromagnetic fields, urea-formaldehyde resin, adhesive.
References

1. Anisimov, M.V. Razrabotka teorii i metodov vozdeystviya elektromagnitnykh poley na napolniteli kleevykh kompozitsiy dlya uluchsheniya ekologichnocti i prochnocti fanery [Tekst] : dis.... kand. tekhn. nauk : 05.21.05 : zashchishchena 26.09.14 / M. V. Anisimov. - Voronezh, 2014. - 291 s.

2. Adsorbtsiya formal´degida aktivirovannymi napolnitelyami karbamidoformal´de-gidnykh smol [Tekst] : monografiya / L. I. Bel´chinskaya, O. A. Tkacheva, O. V. Lavlinskaya, M. V. Anisimov. - Voronezh, 2014. - 224 s.

3. Khodosova, N.A. Snizhenie kontsentratsii formal´degida v okruzhayushchey srede alyu-mosilikatnymi sorbentami [Tekst] : dis... kand. khim. nauk : 03.00.16 / N.A. Khodosova. - Ivanovo, 2009. - 197 s.

4. Benis, H. A Product Risk Assessment Nomograph, report prepared for the New Zealand Ministry of Consumer Affairs, dated February 1990 [Text] / H. Benis. European Commission Establishing a Comparative Inventory of Approaches and Methods Used by Enforcement Authorities for the Assessment of the Safety of Consumer Products Covered by Directive 2001/95/EC on General Product Safety and Identification of Best Practices. Report prepared by Risk & Policy Analysts (RPA), Loddon, Norfolk, UK, 2005.

5. Kinney, G. Practical risk analysis for safety management [Text] / Kinney G, Wiruth A. D. - California : Naval Weapons Center, June, 1976.

6. Framework model of product risk assessment [Text] / Gene Rider, Dirk van Aken, Carian van de Sman, John Mason and Xiao Chen. International Journal of Injury Control and Safety Pro-motion. - 2009. - Vol. 16. - №. 2. - pp. 73-80.

7. Establishing a comparative inventory of approaches and methods used by enforcement au-thorities for the assessment of the safety of consumer products covered by Directive 2001/95/EC on general product safety and identification of best practices [Text] / Floyd, P. J., Nwaogu, T. A., Sa-lado, R., George, C., Vernon, J. : Final Report J497 prepared by Risk & Policy Analysis Limited for European Commons Directorate General SANCO). Loddon, UK, 2006.

8. Floyd, P.J. Risk ranking/or small and medium enterprises contract [Text] / P.J. Floyd, A.J. Footitt. (Research report 256/1999 prepared by risk & policy analysis limited for the health and safety executive). Colgate, UK: Crown, 1999.

9. European Commission (2004a). Guidelines for the management of the community rapid in-formation system (rapex) and for notifications presented in accordance with article II of Directive 2001/95/EC Retrieved November 12,2008 from [Elektronnyy resurs]. - Rezhim dostupa: http://ec.europa.eu/consumers/conssafe/prod _safe/gpsd/rapex guid_en.pdf.

10. Modeling Approaches for Characterizing and Evaluating Environmental Exposure to En-gineered Nanomaterials in Support of Risk-Based Decision Making [Text] / Christine Ogilvie Hendren, Michael Lowry, Khara D. Grieger, Eric S. Money, John M. Johnston, Mark R. Wiesner, Stephen M. Beaulieu. Environ. Sci. Technol. - 2013. - № 47. - pp. 1190-1205.

11. Ann M. Pooler, Center for Excellence in Long-Term Care, 2003.


Login or Create
* Forgot password?