<?xml version="1.0"?>
<!DOCTYPE article
PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.4 20190208//EN"
       "JATS-journalpublishing1.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" article-type="research-article" dtd-version="1.4" xml:lang="en">
 <front>
  <journal-meta>
   <journal-id journal-id-type="publisher-id">Forestry Engineering Journal</journal-id>
   <journal-title-group>
    <journal-title xml:lang="en">Forestry Engineering Journal</journal-title>
    <trans-title-group xml:lang="ru">
     <trans-title>Лесотехнический журнал</trans-title>
    </trans-title-group>
   </journal-title-group>
   <issn publication-format="print">2222-7962</issn>
  </journal-meta>
  <article-meta>
   <article-id pub-id-type="publisher-id">2677</article-id>
   <article-id pub-id-type="doi">10.12737/4522</article-id>
   <article-categories>
    <subj-group subj-group-type="toc-heading" xml:lang="ru">
     <subject>ДЕРЕВОПЕРЕРАБОТКА. ХИМИЧЕСКИЕ ТЕХНОЛОГИИ</subject>
    </subj-group>
    <subj-group subj-group-type="toc-heading" xml:lang="en">
     <subject>WOOD PROCESSING. CHEMICAL TECHNOLOGY</subject>
    </subj-group>
    <subj-group>
     <subject>ДЕРЕВОПЕРЕРАБОТКА. ХИМИЧЕСКИЕ ТЕХНОЛОГИИ</subject>
    </subj-group>
   </article-categories>
   <title-group>
    <article-title xml:lang="en">Mathematical modeling of timber elastic-viscous-plastic deformation in the wood drying process</article-title>
    <trans-title-group xml:lang="ru">
     <trans-title>Математическое моделирование упруговязкопластических деформаций в процессе сушки древесины</trans-title>
    </trans-title-group>
   </title-group>
   <contrib-group content-type="authors">
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Соколовский</surname>
       <given-names>Ярослав Иванович</given-names>
      </name>
      <name xml:lang="en">
       <surname>Sokolovskiy</surname>
       <given-names>Yaroslav Иванович</given-names>
      </name>
     </name-alternatives>
     <email>sokolowskyy@ukr.net</email>
    </contrib>
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Крошный</surname>
       <given-names>Игорь Николаевич</given-names>
      </name>
      <name xml:lang="en">
       <surname>Kroshnyy</surname>
       <given-names>Igor Николаевич</given-names>
      </name>
     </name-alternatives>
     <email>kroshny.igor@gmail.com</email>
    </contrib>
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Прусак</surname>
       <given-names>Юрий Владимирович</given-names>
      </name>
      <name xml:lang="en">
       <surname>Prusak</surname>
       <given-names>Yuriy Владимирович</given-names>
      </name>
     </name-alternatives>
     <email>prsk@ukr.net</email>
    </contrib>
   </contrib-group>
   <pub-date publication-format="print" date-type="pub" iso-8601-date="2014-06-05T00:00:00+04:00">
    <day>05</day>
    <month>06</month>
    <year>2014</year>
   </pub-date>
   <pub-date publication-format="electronic" date-type="pub" iso-8601-date="2014-06-05T00:00:00+04:00">
    <day>05</day>
    <month>06</month>
    <year>2014</year>
   </pub-date>
   <volume>4</volume>
   <issue>2</issue>
   <fpage>166</fpage>
   <lpage>177</lpage>
   <self-uri xlink:href="https://anni.editorum.ru/en/nauka/article/2677/view">https://anni.editorum.ru/en/nauka/article/2677/view</self-uri>
   <abstract xml:lang="ru">
    <p>В статье описано решение актуальной научной задачи математического моделирования процессов тепломассопереноса и упруговязкопластических деформаций с учетом механико-сорбционной ползучести в гигроскопических капиллярно-пористых материалах с переменными анизотропными тепломеханическими характеристиками, которая имеет важное значение для рационального выбора и обоснования энергосберегающих технологий сушки древесины при обеспечении необходимого качества продукции.</p>
   </abstract>
   <trans-abstract xml:lang="en">
    <p>In the paper there is described solving a current scientific problem of mathematical modeling of heat-mass transfer processes and elastic-viscous-plastic deformation taking into account the mechanics and sorption creep in hygroscopic capillary-porous materials with variable anisotropic heat and mechanics characteristics what is of importance for the rational choice and substantiation of energy conservative technologies of timber drying under the conditions of necessary qualitative production providing.</p>
   </trans-abstract>
   <kwd-group xml:lang="ru">
    <kwd>математическая модель</kwd>
    <kwd>метод конечных элементов</kwd>
    <kwd>тепломасо-перенос</kwd>
    <kwd>упруговязкопластическое состояние</kwd>
    <kwd>процесс сушки</kwd>
    <kwd>древесина</kwd>
   </kwd-group>
   <kwd-group xml:lang="en">
    <kwd>mathematical model</kwd>
    <kwd>the method of finite elements</kwd>
    <kwd>heat and mass transfer</kwd>
    <kwd>elastic-viscous-plastic state</kwd>
    <kwd>drying process</kwd>
    <kwd>timber</kwd>
   </kwd-group>
  </article-meta>
 </front>
 <body>
  <p>Actuality of theme. During drying of hygroscopic capillary-porous bodies irreversible physical processes arise up and cooperate between itself, there are phase transitions, which predetermine changes in physical mechanical properties of materials in general, initial form of body, formation of cracks in it and its possible destruction. These phenomena which take place in the conditions of high changeability of structural and physical properties of hygroscopic materials are basic restrictive factors for development of effective methods of management the capillary-porous materials drying processes. The improvement of existing and creation of new resources saving technologies of drying is closely related to the detailed study deformation-relaxation and heat-and-mass transfer processes in capillary-porous materials. Applying only experimental methods of the deformation run and heat-and-mass transfer research in such systems is connected with considerable financial expenses and technical difficulties. Therefore there is an objective necessity of development of two-dimensional mathematical models and effective programmatic-algorithmic facilities of their</p>
 </body>
 <back>
  <ref-list>
   <ref id="B1">
    <label>1.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Уголев, Б. Н. Древесиноведение с основами лесного товароведения [Текст] : учебник для лесотехнических вузов / Б. Н. Уголев // Министерство образования Российськой Федерации, МГУЛ. - Изд. 3-е, переработаное и дополненое. - МГУЛ, 2002. - 340 с.</mixed-citation>
     <mixed-citation xml:lang="en">Ugolev, B. N. Drevesinovedenie s osnovami lesnogo tovarovedeniya [Tekst] : uchebnik dlya lesotekhnicheskikh vuzov / B. N. Ugolev. Ministerstvo obrazovaniya Rossiys&amp;#180;koy Federatsii, MGUL. - Izd. 3-e, pererabotanoe i dopolnenoe. - MGUL, 2002. - 340 s.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B2">
    <label>2.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Соколовский, Я. И. Моделирование деформационно-релаксационных процессов в древесине во время сушки [Текст] / Я. И. Соколовский, М. В. Дендюк, Б. П. Поберейко // Лесной журнал : изв. ВУЗов России. -Архангельск, 2007. - № 1. - С. 75-83.</mixed-citation>
     <mixed-citation xml:lang="en">Sokolovskiy, Ya. I. Modelirovanie deformatsionno-relaksatsionnykh protsessov v drevesine vo vremya sushki [Tekst] / Ya. I. Sokolovskiy, M. V. Dendyuk, B. P. Pobereyko. Lesnoy zhurnal : izv. VUZov Rossii. -Arkhangel&amp;#180;sk, 2007. - № 1. - S. 75-83.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B3">
    <label>3.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Дорняк, О. Р. Моделирование реологического поведения древесины в процессах прессования [Текст] / О. Р. Дорняк // Инженерно-физический журнал. - 2003. - Т. 76.- №3. - С. 150-155.</mixed-citation>
     <mixed-citation xml:lang="en">Dornyak, O. R. Modelirovanie reologicheskogo povedeniya drevesiny v protsessakh pressovaniya [Tekst] / O. R. Dornyak. Inzhenerno-fizicheskiy zhurnal. - 2003. - T. 76.- №3. - S. 150-155.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B4">
    <label>4.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Акулич, П. В. Моделирование неизотермического влагопереноса и напряжений в древесине при сушке [Текст] / П. В. Акулич, К. Е. Милитцер // ИФЖ. - 1998. - Т. 71. - № 3. - С. 404-411.</mixed-citation>
     <mixed-citation xml:lang="en">Akulich, P. V. Modelirovanie neizotermicheskogo vlagoperenosa i napryazheniy v drevesine pri sushke [Tekst] / P. V. Akulich, K. E. Milittser. IFZh. - 1998. - T. 71. - № 3. - S. 404-411.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B5">
    <label>5.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Perre, P. A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions [Text] / P. Perre, J. Passard // Drying Technology Journal. - 2004. - Vol. 22. -N. 1-2. - pp. 27-44.</mixed-citation>
     <mixed-citation xml:lang="en">Perre, P. A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions [Text] / P. Perre, J. Passard. Drying Technology Journal. - 2004. - Vol. 22. -N. 1-2. - pp. 27-44.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B6">
    <label>6.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Кристенсен, P. Введение в теорию вязкоупругости [Текст] / Р. Кристенсен. -М. : Мир, 1974.-338 с.</mixed-citation>
     <mixed-citation xml:lang="en">Kristensen, P. Vvedenie v teoriyu vyazkouprugosti [Tekst] / R. Kristensen. -M. : Mir, 1974.-338 s.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B7">
    <label>7.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Rodic, J. Mechanics of wood and composites [Text] / J. Rodic, A. Jayne // Van Nostraind Reinhold. New York. - 1982. - 712 p.</mixed-citation>
     <mixed-citation xml:lang="en">Rodic, J. Mechanics of wood and composites [Text] / J. Rodic, A. Jayne. Van Nostraind Reinhold. New York. - 1982. - 712 p.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B8">
    <label>8.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Сегерлинд, Л. Применение метода конечных элементов [Текст] / Л. Сегерлинд. -М. : Мир, 1979. - 378 с.</mixed-citation>
     <mixed-citation xml:lang="en">Segerlind, L. Primenenie metoda konechnykh elementov [Tekst] / L. Segerlind. -M. : Mir, 1979. - 378 s.</mixed-citation>
    </citation-alternatives>
   </ref>
   <ref id="B9">
    <label>9.</label>
    <citation-alternatives>
     <mixed-citation xml:lang="ru">Соколовський, Я. I. Алгоритмічне та програмне забезпечення системи моделюван-ня та аналізу процесу сушіння капілярно-пористих матеріалів [Текст] / Я. I. Соколовський, I. М. Крошний // Вісник Національного університету «Львівська політехніка»: Комп&amp;#180;ютерні науки та інформаційні технологи. - Львів Вид-во Львівської політехніки, 2012. - № 732. - С 306-315.</mixed-citation>
     <mixed-citation xml:lang="en">Sokolovs&amp;#180;kiy, Ya. I. Algoritmіchne ta programne zabezpechennya sistemi modelyuvan-nya ta analіzu protsesu sushіnnya kapіlyarno-poristikh materіalіv [Tekst] / Ya. I. Sokolovs&amp;#180;kiy, I. M. Kroshniy. Vіsnik Natsіonal&amp;#180;nogo unіversitetu «L&amp;#180;vіvs&amp;#180;ka polіtekhnіka»: Komp&amp;#180;yuternі nauki ta іnformatsіynі tekhnologi. - L&amp;#180;vіv Vid-vo L&amp;#180;vіvs&amp;#180;koї polіtekhnіki, 2012. - № 732. - S 306-315.</mixed-citation>
    </citation-alternatives>
   </ref>
  </ref-list>
 </back>
</article>
