Submit manuscript
Home / Journals / Actual directions of scientific researches of the XXI century: theory and practice / Volume 3 Issue 9 p. 3 / Comparative study of the process of forestry rippers with passive and active drive of working tools
Comparative study of the process of forestry rippers with passive and active drive of working tools
Submit manuscript
To cite
Citations:

COMPARATIVE STUDY OF THE PROCESS OF FORESTRY RIPPERS WITH PASSIVE AND ACTIVE DRIVE OF WORKING TOOLS
Shabanov M. 1
Lysych Mikhail Nikolaevich 2
Ikonnikov R.
Authors:
1.  Federal State Budget Education Institution of Higher Education «Voronezh State University of Forestry and Technologies named after G.F. Morozov» (Forest Industry, Metrology, Standardization and Certification department, docent)

Voronezh, Voronezh, Russian Federation
2.  Voronezh State University of Forestry and Technologies named after G.F. Morozov (kafedra lesnoy promyshlennosti, metrologii, standartizacii i sertifikacii, starshiy prepodavatel')

Voronezh, Voronezh, Russian Federation
Type:
Article
DOI:
https://doi.org/10.12737/16875
Pages:
from 98 to 102
Status:
Published
Received:
21.12.2015
Accepted:
21.12.2015
Published:
21.12.2015
Language:
Russian
Keywords:
CAD, disc ripper, active and passive drive
Abstract and keywords
Abstract (English):
this article presents the results of comparative testing of dynamic forest disc ripper with passive and active working tools, working in a variety of speed on wood cuttings down not cleared away from stubs. Simulation was carried out in a CAD environment using the SolidWorks application for engineering calculations SolidWorksMotion.

Keywords:
CAD, disc ripper, active and passive drive
Text

УДК: 631.3.072

Сравнительные исследования рабочего процесса лесного рыхлителя с пассивным и активным приводом рабочих органов

COMPARATIVE STUDY OF THE PROCESS OF FORESTRY rippers With passive and active drive of working tools

Лысыч М.Н.,к.т.н., ст. преп.

Шабанов М.Л., к.т.н., доцент

Иконников Р.В.,студент

ФГБОУ ВО «Воронежский государственный лесотехнический

университет имени Г.Ф. Морозова»,

г. Воронеж, Россия

DOI: 10.12737/16875

 

Аннотация: в статье приводятся результаты сравнительных динамических испытаний лесного дискового рыхлителя с пассивными и активными рабочими органами, работающими в различных скоростных режимах на нераскорчеванных вырубках. Имитационное моделирование проводилось в среде САПР SolidWorks с использованием приложения для инженерных расчетов SolidWorksMotion.

Summary: this article presents the results of comparative testing of dynamic forest disc ripper with passive and active working tools, working in a variety of speed on wood cuttings down not cleared away from stubs. Simulation was carried out in a CAD environment using the SolidWorks application for engineering calculations SolidWorksMotion.

Ключевые слова: САПР, дисковый рыхлитель, активный и пассивный привод

 

Keywords: CAD, disc ripper, active and passive drive

References

1. Lysych, M. N. Diskovyy lesnoy rykhlitel´ [Tekst] / M. N. Lysych, M. L. Shabanov, R. V. Ikonnikov. Aktual´nye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika - Voronezh, 2015. - № 2, ch. 1 (13-1). - S. 60-64

2. Lysych, M. N. Modelirovanie raboty pochvoobrabatyvayushchikh orudiy v usloviyakh vyrubok [Tekst] / M. N. Lysych, M. L. Shabanov, I. V. Levishchev. Aktual´nye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika. - Voronezh, 2014. - № 2, ch. 2 (7-2). - S. 327-332

This work is licensed under Creative Commons Attribution 4.0 International

© anni.editorum.ru
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?