employee
Voronezh, Russian Federation
employee
Voronezh, Russian Federation
Russian Federation
employee
employee
Ho Chi Minh, Vietnam
Minsk, Belarus
UDK 63 Сельское хозяйство. Лесное хозяйство. Охота. Рыбное хозяйство
GRNTI 66.29 Технология и оборудование для обработки древесины
GRNTI 66.00 ЛЕСНАЯ И ДЕРЕВООБРАБАТЫВАЮЩАЯ ПРОМЫШЛЕННОСТЬ
The purpose of this work was to study the properties of interfacial interaction of the basis of a new promising impregnating composition of used motor oil with birch wood in three mutually perpendicular directions (end, radial, tangential). Samples of birch wood were chosen as objects of study. The interfacial interaction was determined by the sessile drop method by the value of the contact angle, which makes it possible to establish a significant decrease in their values relative to distilled water when using an impregnating composition based on used motor oil, apparently as a result of the interfacial interaction between the wood and the hydrophobic matrix of the impregnating composition. When water molecules wet the hydrophilic surface of wood, which occurs as a result of adsorption and capillary condensation, water dipoles are attracted to the negatively charged surface of the molecular chains of cellulose, hemicelluloses and lignin due to the presence of unsaturated hydroxyl valences on their surface. An analysis of the dynamic and static contact angles of wetting wood impregnated with used engine oil made it possible to establish a significant increase in these angles compared to the data obtained for unimpregnated wood. The contact angles increase, apparently, as a result of the interfacial interaction of the functional groups of wood and the main components of the impregnating composition, leading to the formation of a hydrophobic surface. When comparing the contact angle of wetting wood with water and used engine oil, a decrease in its value was found when wetting used engine oil in comparison with water due to more intensive diffusion of used engine oil molecules into wood and the formation of intermolecular interactions of functional groups of wood and used engine oil.
: used motor oil, birch wood, Betula pendula ROTH, interfacial interaction, contact angle, viscosity
1. Spear M. J. et al. Review of functional treatments for modified wood //Coatings. - 2021. - T. 11. - №. 3. - S. 327.DOI: https://doi.org/10.3390/coatings11030327
2. Song K. et al. High temperature and fire behavior of hydrothermally modified wood impregnated with carbon nanomaterials //Journal of hazardous materials. - 2020. - T. 384. - S. 121283. DOI: https://doi.org/10.1016/j.jhazmat.2019.121283
3. Bayani S., Taghiyari H. R., Papadopoulos A. N. Physical and mechanical properties of thermally-modified beech wood impregnated with silver nano-suspension and their relationship with the crystallinity of cellulose //Polymers. - 2019. - T. 11. - №. 10. - S. 1538. DOI: https://doi.org/10.3390/polym11101538
4. Li P. et al. Preparation and characterization of sodium silicate impregnated Chinese fir wood with high strength, water resistance, flame retardant and smoke suppression //Journal of Materials Research and Technology. - 2020. - T. 9. - №. 1. - S. 1043-1053. DOI: https://doi.org/10.1016/j.jmrt.2019.10.035
5. Kurkowiak K., Emmerich L., Militz H. Wood chemical modification based on bio-based polycarboxylic acid and polyols-status quo and future perspectives //Wood Material Science & Engineering. - 2022. - T. 17. - №. 6. - S. 1040-1054. DOI: https://doi.org/10.1080/17480272.2021.1925961
6. Sangregorio A. et al. Humin based resin for wood modification and property improvement // Green Chemistry. - 2020. - T. 22. - №. 9. - S. 2786-2798. DOI:https://doi.org/10.1039/C9GC03620B
7. Wu S. S., Tao X., Xu W. Thermal conductivity of Poplar wood veneer impregnated with graphene/polyvinyl alcohol //Forests. - 2021. - T. 12. - №. 6. - S. 777. https://doi.org/10.3390/f12060777
8. Dong Y. et al. Environmentally benign wood modifications: a review //ACS Sustainable Chemistry & Engineering. - 2020. - T. 8. - №. 9. - S. 3532-3540. https://doi.org/10.1021/acsmacrolett.2c00427
9. Lykidis C., Kotrotsiou K., Tsichlakis A. Reducing set-recovery of compressively densified poplar wood by impregnation-modification with melamine-formaldehyde resin //Wood Material Science & Engineering. - 2020. - T. 15. - №. 5. - S. 269-277. https://doi.org/10.1080/17480272.2019.1594365
10. Lin, W., Huang, Y., Li, J. et al. Cellulose (2018) 25: 7341. https://doi.org/10.1007/s10570-018-2074-y
11. Čermák P. et al. Wood-water interactions of thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood //Holzforschung. - 2022. - T. 76. - №. 5. - S. 437-450. https://doi.org/10.1515/hf-2021-0164
12. Biziks, V., Bicke, S., and Militz, H. (2019). Penetration depth of phenol-formaldehyde (PF) resin into beech wood studied by light microscopy. Wood Sci. Technol. 53: 165-176, https://doi.org/10.1007/s00226-018-1058-2.
13. Baar J. et al. Effect of hemp oil impregnation and thermal modification on European beech wood properties //European Journal of Wood and Wood Products. - 2021. - T. 79. - №. 1. - S. 161-175. https://doi.org/10.1007/s00107-020-01615-9
14. Shen X. et al. Effect of furfurylation on hierarchical porous structure of poplar wood //Polymers. - 2020. - T. 13. - №. 1. - S. 32. https://doi.org/10.3390/polym13010032
15. Li W. et al. Understanding the effect of combined thermal treatment and phenol-formaldehyde resin impregnation on the compressive stress of wood //Wood Science and Technology. - 2022. - T. 56. - №. 4. - S. 1071-1086. https://doi.org/10.1007/s00226-022-01400-2
16. Popescu C. M., Pfriem A. Treatments and modification to improve the reaction to fire of wood and wood based products-An overview //Fire and Materials. - 2020. - T. 44. - №. 1. - S. 100-111. https://doi.org/10.1002/fam.2779
17. Seng Hua Lee, Zaidon Ashaari, Wei Chen Lum, Juliana Abdul Halip, Aik Fei Ang, Li Peng Tan, Kit Ling Chin, Paridah Md Tahir, Thermal treatment of wood using vegetable oils: A review, Construction and Building Materials, Volume 181, 2018, Pages 408-419, https://doi.org/10.1016/j.conbuildmat.2018.06.058.
18. Impregnation of wood with waste engine oil to increase water-and bio-resistance / L. Belchinskaya, K. V. Zhuzhukin, T. Ishchenko, A. Platonov. Forests. 2021; 12 (12): 1762. DOI: https://doi.org/10.3390/f12121762.
19. Tomak E. D. Surface wettability of boron and oil-treated wood //Cerne. - 2022. - T. 28. DOI:https://doi.org/10.1590/01047760202228013058
20. Povyshenie vodostoykosti drevesiny propitochnym sostavom na osnove rastitel'nogo masla s nanoporoshkom dioksida kremniya / E. V. Tomina, A. I. Dmitrenkov, K. V. Zhuzhukin [i dr.] // Lesotehnicheskiy zhurnal. - 2022. - T. 12, № 2(46). - S. 68-79. - DOI: https://doi.org/10.34220/issn.2222-7962/2022.2/6.
21. Vliyanie ul'trazvukovogo dispergirovaniya propitochnogo sostava drevesiny na ee gidrofobizaciyu / L. I. Bel'chinskaya, K. V. Zhuzhukin, L. A. Novikova [i dr.] // Lesotehnicheskiy zhurnal. - 2019. - T. 9, № 2(34). - S. 126-136. - DOI: https://doi.org/10.34220/issn.2222-7962/2019.2/14.
