Submit manuscript
Home / Journals / Actual directions of scientific researches of the XXI century: theory and practice / Volume 2 Issue 3 p. 2
Actual directions of scientific researches of the XXI century: theory and practice
Journal
ACTUAL DIRECTIONS OF SCIENTIFIC RESEARCHES OF THE XXI CENTURY: THEORY AND PRACTICE
Volume, issue
2 № 3 p.2 Published

THE GROWTH POTENTIAL OF THE TIMBER INDUSTRY

EFFECT OF THE ADDITIVE WASTE OF SOAPSTONE PROCESSING ON THE STRENGTH AND STIFFNESS OF WOOD-CEMENT MATERIAL
Authors
Andreev A., Chalkin Andrey
Status
Published
DOI
https://doi.org/10.12737/3911
Pages
from 14 to 16
CALCULATION AND DESIGN OF PAVEMENT WITH A HEAT INSULATION LAYER MADE PLATES «PENOPLEX»
Authors
Arutyunyan A.
Status
Published
DOI
https://doi.org/10.12737/3912
Pages
from 17 to 20
MACHINE TECHNOLOGY TIMBER HARVESTING IN MOUNTAIN FAR EAST FORESTS
Authors
Baranov A.
Status
Published
DOI
https://doi.org/10.12737/3913
Pages
from 21 to 26
PERSPECTIVE TRANSMISSIONS FOR TRACKED VEHICLES OF TIMBER INDUSTRY COMPLEX
Authors
Baskakov D., Baurin A.
Status
Published
DOI
https://doi.org/10.12737/3915
Pages
from 27 to 31
TIMBER INDUSTRY COMPLEX AS THE UNTAPPED POTENTIAL OF THE ECONOMY
Authors
Berlyakova A., Kuznetsov S.
Status
Published
DOI
https://doi.org/10.12737/3916
Pages
from 32 to 34
DEVELOPMENT OF RATIONAL DEVELOPMENT SCHEMES BAZ FOREST RESOURCES AT THE REGIONAL LEVEL
Authors
Burmistrova Olga, Pilnik Yuliya Nikolaevna
Status
Published
DOI
https://doi.org/10.12737/3917
Pages
from 35 to 37
FUNCTIONAL BLOCK DIAGRAM FOR CALCULATING THE MAIN PARAMETERS SAW CHAIN IN MATLAB
Authors
Bukhtoyarov Leonid, Sergienko D.
Status
Published
DOI
https://doi.org/10.12737/3918
Pages
from 38 to 42
JUSTIFICATION OF ECONOMIC FEASIBILITY OF USE OF THE PLOTOVY ALLOY OF FOREST PRODUCTS
Authors
Vasilyev Vladimir
Status
Published
DOI
https://doi.org/10.12737/3919
Pages
from 43 to 46
TRANSPORT AND TECHNOLOGICAL SCHEMES FOR SUPPLY OF FOREST PRODUCTS BY TRASNPORT´S VARIOUS TYPE
Authors
Vasilyev Vladimir
Status
Published
DOI
https://doi.org/10.12737/3920
Pages
from 47 to 50
INCREASE OF RELIABILITY OF CALCULATION OF THE MAXIMUM EXPENSES OF WATER AT DESIGN OF THE ROAD DRAINAGE SYSTEM
Authors
Vinogradov A., Salminen E.
Status
Published
DOI
https://doi.org/10.12737/3921
Pages
from 51 to 55
UNLOADING TIMBER CARGO OUT OF WATER ON LOG RECEIVING PORTS
Authors
Gaysin I., Voytko P.
Status
Published
DOI
https://doi.org/10.12737/3922
Pages
from 56 to 60
RECREATIONAL CHARACTERISTICS GREEN ZONE FORESTS OF KAMA CITIES OF THE REPUBLIC OF TATARSTAN
Authors
Gibadullin Nursil
Status
Published
DOI
https://doi.org/10.12737/3923
Pages
from 60 to 64
PREPARATION OF PINE SEEDS BY LIQUID SEPARATION
Authors
Gradyskiy Yu., Temnikov D.
Status
Published
DOI
https://doi.org/10.12737/3924
Pages
from 65 to 66
PERSPECTIVE CUTTING-OFF LESOSECHNYKH DEVICES OF CARS
Authors
Druchinin Denis Yur'evich
Status
Published
DOI
https://doi.org/10.12737/3925
Pages
from 67 to 70
HARVESTING WASTE ENERGY POTENTIAL IN THE AMUR REGION
Authors
Eliskin A.
Status
Published
DOI
https://doi.org/10.12737/3926
Pages
from 71 to 75
THE CALCULATION OF THE TANGENT TRACTIVE EFFORT TRACTOR LHT-100 IN TRANSPORT MODE
Authors
Epifanova A.
Status
Published
DOI
https://doi.org/10.12737/3927
Pages
from 76 to 79
MODERN WAYS ТО IMPROVE AND CONSTRUCTIVELY ESPECIALLY THE WORKERS DOZERS FOREST COMPLEX
Authors
Nosova O., Karpushina Viktoriya, Makeev Viktor, Lepekhina O.
Status
Published
DOI
https://doi.org/10.12737/3928
Pages
from 80 to 86
THE DEVELOPMENT OF TRANSMISSIONS FOR TRACKED FOREST MACHINES
Authors
Kolisov O., Kryuchin K.
Status
Published
DOI
https://doi.org/10.12737/3929
Pages
from 87 to 91
PROSPECTS OF RECOVERED STOCK USE AS A RAW MATERIAL FOR MANUFACTURE OF SAWDUST CEMENT COMPOSITION
Authors
Koparev Vladimir
Status
Published
DOI
https://doi.org/10.12737/3930
Pages
from 92 to 94
APPLICATION OF HAULERS ON THE REMOVAL OF COMMERCIAL TIMBERS IN MOUNTAIN DISTRICTS AND ON SOILS LOW-LOAD-BEARING
Authors
Korol S., Nekhoroshee N.
Status
Published
DOI
https://doi.org/10.12737/3931
Pages
from 95 to 98
THE DEVELOPMENT OF TRANSMISSIONS FOR TRACKED VEHICLES OF TIMBER INDUSTRY COMPLEX
Authors
Kuznetsov N., Kolychev A.
Status
Published
DOI
https://doi.org/10.12737/3932
Pages
from 99 to 103
PERSPECTIVE OF ENHANCED FOREST EXPLOITATION BY NIZKOTOVARNOY WOOD
Authors
Kunitskaya Ol'ga, Grigorev I.
Status
Published
DOI
https://doi.org/10.12737/3933
Pages
from 104 to 107
ENVIRONMENTAL POLLUTION DURING THE CONSTRUCTION OF TRUNK ROADS IN TIMBER HARVESTING COMPLEX
Authors
Kurdyukov D., Kurdyukov R., Manukovsky A., Shamarin N.
Status
Published
DOI
https://doi.org/10.12737/3934
Pages
from 108 to 111
EVOLUTION OF THE EDUCATIONAL POTENTIAL FOREST INDUSTRY IN THE XIX - EARLY XX CENTURY
Authors
Lantukh I., Bezrukova Tatyana
Status
Published
DOI
https://doi.org/10.12737/3935
Pages
from 112 to 113
PERSPECTIVE SUSPENSION SYSTEMS FOR TRACKED VEHICLES OF TIMBER INDUSTRY COMPLEX
Authors
Tarasov S., Malyshev O., Khamdeev D.
Status
Published
DOI
https://doi.org/10.12737/3936
Pages
from 114 to 118
SREDSTVA MEHANIZACII DLYA PROVEDENIYA RUBOK UHODA ZA LESOM
Authors
Pozdnyakov Evgeniy, Malyukov Sergey, Aksenov A.
Status
Published
DOI
https://doi.org/10.12737/3937
Pages
from 119 to 122
THE MANUFACTURING AND LAYING OF ASPHALT MIXES MODIFIED WASTE AT CRUSHED LIMESTONE BUILT FOREST ROADS IN THE CHUVASH REPUBLIC
Authors
Malyanova L.
Status
Published
DOI
https://doi.org/10.12737/3938
Pages
from 123 to 129
EFFECT OF SOIL• S FOREST GROWTH PROPERTIES ON THE PROTECTIVE STANDS METRICS THAT GROW AT RADIOACTIVE CONTAMINATING AREAS
Authors
Markina Zoya, Vecherov V.
Status
Published
DOI
https://doi.org/10.12737/3939
Pages
from 130 to 133
FLOODING OF THE WOOD AND ITS USE IN FORESTRY ENTERPRISES OF THE KOMI REPUBLIC
Authors
Mikheevskaya Marina Aleksandrovna, Bazhukov N.
Status
Published
DOI
https://doi.org/10.12737/3940
Pages
from 134 to 137
DEPENDENCE OF THE GAIN ON THE THICKNESS GRANULAR MOTHERS IN THE PAVEMENT STRUCTURE BY THE HYPOTHESIS OF ELASTIC DEFLECTION
Authors
Mikheevskaya Marina Aleksandrovna, Pilnik Yuliya Nikolaevna
Status
Published
DOI
https://doi.org/10.12737/3941
Pages
from 138 to 141
SPECIES TARGET OPTIMIZATION OF MODES OF FAST CULTIVATION OF PINE STANDS
Authors
Murzinov Yuriy, Malyshev Vladimir
Status
Published
DOI
https://doi.org/10.12737/3942
Pages
from 142 to 146
FEATURES CALCULATION NONRIGID ROAD CLOTHES FOREST ROADS IN THE KOMI REPUBLIC
Authors
Ovchinnikova I., Shatunova V.
Status
Published
DOI
https://doi.org/10.12737/3943
Pages
from 147 to 150
THE PROBLEM SOLVING THROUGH DISTRIBUTION TIMBER INDUSTRY CONCENTRATION AND SPECIALIZATION
Authors
Pilnik Yuliya Nikolaevna, Burmistrova Olga
Status
Published
DOI
https://doi.org/10.12737/3944
Pages
from 151 to 154
METHODS OF OPTIMAL TRANSPORT FLOWS TIMBER
Authors
Pilnik Yuliya Nikolaevna, Burmistrova Olga
Status
Published
DOI
https://doi.org/10.12737/3945
Pages
from 155 to 158
QUALITY IMPROVENMENT OF FOREST RECONSTRUCTION ACTIVITIES
Authors
Pozdnyakov Evgeniy
Status
Published
DOI
https://doi.org/10.12737/3946
Pages
from 159 to 162
THE DEVELOPMENT OF SUSPENSION SYSTEMS FOR TRACKED VEHICLES OF TIMBER INDUSTRY COMPLEX
Authors
Evmeneko V., Poroshkov E., Korsakov A.
Status
Published
DOI
https://doi.org/10.12737/3947
Pages
from 163 to 167
COMPARATIVE STATE PARK AND URBAN FIT NATIVE SPECIES OF FOREST TREES
Authors
Razinkova Aleksandra
Status
Published
DOI
https://doi.org/10.12737/3948
Pages
from 168 to 172
STUDY OF THE PROCESS OF SYNGAS PRODUCTION AND ITS CONVERSION IN DIMETHYL ETHER
Authors
Safin R. G., Ismagilova L.
Status
Published
DOI
https://doi.org/10.12737/3949
Pages
from 173 to 175
PHYSICAL-MECHANICAL PROPERTIES OF WOOD OF WALNUT AND ITS USE IN THE FOREST INDUSTRY
Authors
Slavskiy Vasiliy Aleksandrovich
Status
Published
DOI
https://doi.org/10.12737/3950
Pages
from 176 to 179
DEFINITION OF AUTOMATES EFFIKTIVNOSTI-CONSISTENT PROCESS CONTROL FORESTRY PRODUCTION WITH ADDITION AND EXCEPT INFORMATION
Authors
Solopanov Mihail
Status
Published
DOI
https://doi.org/10.12737/3951
Pages
from 180 to 185
NEED ТО AUTOMATE FREIGHT MANAGEMENT PROCESSES FORESTRY PRODUCTION
Authors
Solopanov Mihail, Sushkov Sergey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/3952
Pages
from 186 to 190
NEED FOR CONSTRUCTION VARIOUS ROADS IN THE FOREST SECTOR
Authors
Ermolov Yuriy, Solopanov Mihail, Makeev Viktor
Status
Published
DOI
https://doi.org/10.12737/3953
Pages
from 191 to 195
THE EXPORT POTENTIAL OF THE FORESTRY ON THE CONCEPT OF SUSTAINABLE NATURE
Authors
Suska A., Bezrukova Tatyana, Kirillova Svetlana
Status
Published
DOI
https://doi.org/10.12737/3954
Pages
from 196 to 199
METHOD OF ASSESSMENT FLOW ON ROADSIDE FORESTRY ECOSYSTEMS
Authors
Status
Published
DOI
https://doi.org/10.12737/3955
Pages
from 200 to 204
DEFINITION OF TECHNICAL STATE PARAMETERS LE SOTANSPROTNYH MACHINES IN THE FOREST COMPLEX
Authors
Status
Published
DOI
https://doi.org/10.12737/3956
Pages
from 205 to 208
OPTIMIZATION OF TIMBER TRANSPORT PROCESSES IN RAIL TRANSPORT IN REGIONS
Authors
Novokshchenov E.
Status
Published
DOI
https://doi.org/10.12737/3957
Pages
from 209 to 212
CLASSIFICATION PAVEMENT IN LOGGING COMPANIES TO CALCULATE THEIR STRENGTH CHARACTERISTICS
Authors
Sushkov Sergey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/3958
Pages
from 213 to 218
DESIGN PRINCIPLES DIALOG TRAFFIC FLOW MODEL TIMBER
Authors
Sushkov Sergey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/3959
Pages
from 219 to 221
JUSTIFICATION REQUIREMENTS GRANULOMETRIC COMPOSITION MATERIAL DRAINAGE LAYER OF LOGGING ROADS
Authors
Sushkov Sergey Ivanovich, Burmistrova Olga
Status
Published
DOI
https://doi.org/10.12737/3960
Pages
from 222 to 225
INNOVATIVE POTENTIAL INDUSTRIES: SUMMARY AND KEY FACTORS
Authors
Uzdenov I.
Status
Published
DOI
https://doi.org/10.12737/3961
Pages
from 226 to 228
FEATURES OF MACHINING OF WOOD THE METHOD OF FLAT GRINDING, VLIYASHCHIYE´S FACTORS FOR FIRMNESS OF THE TOOL AND CUTTING РOWER
Authors
Fridrikh A., Kostyuk O.
Status
Published
DOI
https://doi.org/10.12737/3962
Pages
from 229 to 234
OPTIMIZATION OF PARAMETERS OF SYSTEM OF AUTOMATED MANAGEMENT BY THE MANIPULATOR OF THE SELF-PROPELLED FOREST CAR
Authors
Onuchin E., Tsarev E., Krenev A.
Status
Published
DOI
https://doi.org/10.12737/3963
Pages
from 235 to 239
OPTIMIZATION OF PRIMARY TIMBER TRANSPORTATION IN THE MOUNTAINS HARVESTING
Authors
Chernykh Aleksandr, Abramov Vitaliy Viktorovich, Bondarenko Aleksey
Status
Published
DOI
https://doi.org/10.12737/3964
Pages
from 240 to 244
STUDYING PNEUMATIC SEEDER OF UNIVERSAL MACHINE FOR REFORESTATION
Authors
Chechkov A., Rodionov A.
Status
Published
DOI
https://doi.org/10.12737/3965
Pages
from 245 to 248
DEVELOPMENT OF PERSPECTIVE SUSPENSION SYSTEM FOR WHEELED VEHICLES OF TIMBER INDUSTRY COMPLEX
Authors
Klubnichkin Evgeniy Evgen'evich, Klubnichkin Vladislav Evgen'evich, Shishov E.
Status
Published
DOI
https://doi.org/10.12737/3966
Pages
from 249 to 252
ENERGY SAVING: A MODERN APPROACH TO THE CLEANING OF CUTTINGS
Authors
Aksenov A., Malyukov Sergey
Status
Published
DOI
https://doi.org/10.12737/5986
Pages
from 10 to 13

WOOD PROCESSING IN RUSSIA: KEY SUCCESS FACTORS

WOOD COMPOSITE - IMPROVING ITS MONOLITHIC STRUCTURE
Authors
Storodubtseva Tamara
Status
Published
DOI
https://doi.org/10.12737/3967
Pages
from 253 to 256
INFLUENCE OF ELECTROMAGNETIC PROCESSING OF FILLERS ON EMISSION OF FREE FORMALDEHYDE FROM READY PLYWOOD
Authors
Anisimov Maksim
Status
Published
DOI
https://doi.org/10.12737/3968
Pages
from 257 to 263
INFLUENCE OF ELECTROMAGNETIC PROCESSING OF FILLERS ON PLYWOOD DURABILITY AT SKALYVANIYA ON THE GLUE LAYER
Authors
Anisimov Maksim
Status
Published
DOI
https://doi.org/10.12737/3969
Pages
from 264 to 269
TECHNO-ECONOMICINDICATORS OFNEW DESIGNDISCCHIPPERS
Authors
Bereznikov S., Fokin S.
Status
Published
DOI
https://doi.org/10.12737/3970
Pages
from 270 to 272
RESEARCH OF IN-SERVICE STRESS-STRAIN STATE OF WOODEN SLEEPERS
Authors
Bozhelko I.
Status
Published
DOI
https://doi.org/10.12737/3971
Pages
from 273 to 276
CHANGE OF GROWTH OF EUROPEAN CHESTNUT WOOD IN CONNECTION WITH VERTICAL ZONING
Authors
Burakova Ekaterina, Snegireva Svetlana Nikolaevna
Status
Published
DOI
https://doi.org/10.12737/3972
Pages
from 277 to 281
EXPRESS METHOD FOR DETERMINING THE MAIN INDICATORS OF QUALITY WOOD OF TREE SPECIES GROWING IN THE TEMPERATE CONTINENTAL CLIMATIC ZONES
Authors
Varivodina Inna, Samoylenkov V.
Status
Published
DOI
https://doi.org/10.12737/3973
Pages
from 282 to 285
STUDY OF THE INFLUENCE OF THE PHOSPHATE POTASSIUM ON FIRE PROTECTION WOOD- PARTICLE BOARDS
Authors
Vakhnina Tatyana, Vinogradov A.
Status
Published
DOI
https://doi.org/10.12737/3974
Pages
from 286 to 288
RESEARCH OF INFLUENCE OF DIAMETER OF THE LOG ON BARK THICKNESS
Authors
Gazizov A., Abubyakyarova D.
Status
Published
DOI
https://doi.org/10.12737/3975
Pages
from 289 to 292
STUDY OF WOODY BIOMASS PLASMA GASIFICATION DIFFERENT HUMIDITY
Authors
Galeev T., Sadrtdinov A.
Status
Published
DOI
https://doi.org/10.12737/3976
Pages
from 293 to 295
FLOOR SLABS OF WOOD-POLYMER COMPOSITE
Authors
Galiev I.
Status
Published
DOI
https://doi.org/10.12737/3977
Pages
from 296 to 297
CALIBRATION STRAIN GAUGES ТО DETERMINE THE DRIVE TORQUE CHIPPER MODULE
Authors
Germanovich A.
Status
Published
DOI
https://doi.org/10.12737/3978
Pages
from 298 to 302
IMPROVEMENT OF TECHNOLOGICAL PREPARATION OF PRODUCTION OF TIMBER
Authors
Glotov A., Glotova T., Karpeykin A.
Status
Published
DOI
https://doi.org/10.12737/3979
Pages
from 303 to 305
ON THE IMPROVEMENT OF RESOURCE-SAVING TECHNOLOGIES OF WOOD PROCESSING
Authors
Gorbacheva Natalya
Status
Published
DOI
https://doi.org/10.12737/3980
Pages
from 306 to 308
METHOD OF FAST OF IMPREGNATION WOOD
Authors
Groshikov V., Ovsyannikov S.
Status
Published
DOI
https://doi.org/10.12737/3981
Pages
from 309 to 310
PHASED OPTIMIZATION BUCKING OF STEMS WHEN LOGGING IN SPARSELY WOODED AREAS
Authors
Sviridov Vasiliy, Gudkov Andrey, Serebryanskiy Aleksey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/3982
Pages
from 311 to 313
MATHEMATICAL MODELING OF THE FORMS OF WHIPS HAVING CURVATURE FOR SOLVING MULTICRITERIA PROBLEMS BUCKING
Authors
Sviridov Vasiliy, Gudkov Andrey, Serebryanskiy Aleksey Ivanovich
Status
Published
DOI
https://doi.org/10.12737/3983
Pages
from 314 to 318
PARAMETERS OF WORKING SURFACE SPRING-TONGUE AEROSTATICS DIRECTING OF BAND SAWING MACHINE
Authors
Derbin Vasiliy, Derbin Mikhail Vasil'evich
Status
Published
DOI
https://doi.org/10.12737/3984
Pages
from 319 to 321
PROGRESSIVE TECHNOLOGIES IN THE WOODWORKING, THE WOODCUTTING EQUIPMENT AND THE TOOL
Authors
Elfimova M.
Status
Published
DOI
https://doi.org/10.12737/3985
Pages
from 322 to 325
PROSPECTS OF DEVELOPMENT OF THE TIMBER BUSINESS IN RUSSIA
Authors
Eremenko N., Kuznetsov S.
Status
Published
DOI
https://doi.org/10.12737/3986
Pages
from 326 to 330
FEATURES OF FINISHING OF MDF POWDER PAINTS
Authors
Zheltoukhova N., Novoselova Irina
Status
Published
DOI
https://doi.org/10.12737/3987
Pages
from 335 to 337
PROCESSING OF THE WOOD POLLUTED BY RADIONUCLIDES, ON MOBILE INSTALLATIONS
Authors
Merkelov V., Zaikin Anatoliy Nikolaevich, Bogdanova Yu.
Status
Published
DOI
https://doi.org/10.12737/3988
Pages
from 338 to 341
HIGH LEVEL MODELING LIKE A METHOD OF EFFICIENCY ENHANCEMENT OF CUSTOM FURNITURE PRODUCTION
Authors
Zakharova I.
Status
Published
DOI
https://doi.org/10.12737/3989
Pages
from 342 to 346
FEATURES DETERMINATION OF ASH IN THE WOOD PELLETS
Authors
Zotova Elena
Status
Published
DOI
https://doi.org/10.12737/3990
Pages
from 347 to 350
MACHINABILITY WOOD OF DIFFERENT SPECIES
Authors
Kamyshanov D.
Status
Published
DOI
https://doi.org/10.12737/3991
Pages
from 351 to 354
DESIGN-PLANNING IS IN TECHNOLOGY OF BRUSH-OLDNESS OF THE PARKED
Authors
Karavaev Z., Dyachenko V.
Status
Published
DOI
https://doi.org/10.12737/3992
Pages
from 355 to 356
BACKGROUND OF CHANGES IN THE SYSTEM OF SAWING PRODUCTION
Authors
Korelskaya M.
Status
Published
DOI
https://doi.org/10.12737/3994
Pages
from 361 to 365
THE APPRAISAL OF OPERATIONAL PROPERTIES FURNITURE COVERS
Authors
Korchagin E., Novoselova Irina
Status
Published
DOI
https://doi.org/10.12737/3995
Pages
from 366 to 369
INVESTIGATION OF VOLUME OF OUTPUT OF LUMBER WHEN CUTTING OF ROUND TIMBER FROM THE RING DEFEAT
Authors
Krasnova V., Sergeeva N.
Status
Published
DOI
https://doi.org/10.12737/3996
Pages
from 370 to 374
OPTIMIZATION OF PROCESS OF MODIFYING OF WOOD
Authors
Kunitskaya Ol'ga, Grigorev I.
Status
Published
DOI
https://doi.org/10.12737/3997
Pages
from 375 to 378
PROCESSING OF LOW-COMMODITY WOOD ON TECHNOLOGICAL SPILL
Authors
Lokshtanov B., Kunitskaya Ol'ga, Grigorev I.
Status
Published
DOI
https://doi.org/10.12737/3998
Pages
from 379 to 382
TYPES AND APPLICATION OF PLYWOOD
Authors
Meshcheryakova Anna, Bukharin A.
Status
Published
DOI
https://doi.org/10.12737/3999
Pages
from 386 to 390
THE ANALYSIS OF A SAWMILL EQUIPMENT USED IN SAWING PRODUCTION
Authors
Meshcheryakova Anna, Zheltoukhova N.
Status
Published
DOI
https://doi.org/10.12737/4000
Pages
from 391 to 393
RATIONAL USE OF WOOD IN THE MANUFACTURE PANEL OF END CUTS OF TIMBER
Authors
Mikryukova Elena, Purtova E.
Status
Published
DOI
https://doi.org/10.12737/4001
Pages
from 394 to 398
END MILL FOR WOOD BASED PLATES PROCESSING, ENHANCED ASPIRATION EFFICACY
Authors
Rudak O., Rudak P., Omelyusik A.
Status
Published
DOI
https://doi.org/10.12737/4002
Pages
from 399 to 402
A METHOD OF MODIFYING PHENOL-FORMALDEHYDE RESINS FOR PRODUCTION OF WOOD-BOARDS
Authors
Osetrov Andrey, Ugryumov Sergey
Status
Published
DOI
https://doi.org/10.12737/4003
Pages
from 403 to 406
INVESTIGATION OF COMPOSITE COATINGS FOR FRICTION UNITS OF WOOD FLAKER´S EQUIPMENT
Authors
Prozorov Yaroslav
Status
Published
DOI
https://doi.org/10.12737/4004
Pages
from 407 to 410
FILTERING MATERIAL ON THE BASIS OF POWDERED CELLULOSE
Authors
Prosvirnikov D. B., Akhmetshin I.
Status
Published
DOI
https://doi.org/10.12737/4005
Pages
from 411 to 414
FEATURES DESIGN FURNITURE FOR PEOPLE WITH DISABILITIES
Authors
Savitskaya O., Dyachenko V.
Status
Published
DOI
https://doi.org/10.12737/4006
Pages
from 415 to 416
INFLUENCE OF PROCESS PARAMETERS OF WOOD WASTE GASIFICATION PRESSURE ON THE COMPOSITION OF THE SYNTHESIS GAS
Authors
Sadrtdinov A., Safin R. G., Saldaev V.
Status
Published
DOI
https://doi.org/10.12737/4007
Pages
from 417 to 419
DETERMINING THE PRESENCE OF SYNTHETIC INGREDIENTS IN WOOD BIOFUEL
Authors
Safonov Andrey Olegovich
Status
Published
DOI
https://doi.org/10.12737/4008
Pages
from 420 to 424
IMPROVING THE EFFICIENCY OF WOODWORKING MACHINES BASED ON THE OPTIMIZATION OF PROCESSING MODES
Authors
Sivakov Vladimir, Avdus A.
Status
Published
DOI
https://doi.org/10.12737/4009
Pages
from 425 to 428
IMPLEMENTATION OF THE LINE FOR CONSTRUCTION OF HOUSES WOODEN BRICKS
Authors
Skripka V.
Status
Published
DOI
https://doi.org/10.12737/4010
Pages
from 429 to 432
PHYSICAL FACTORS AFFECTING THE STRENGTH CHARACTERISTICS OF WOOD FILLER
Authors
Storodubtseva Tamara, Askomitnyy Aleksey
Status
Published
DOI
https://doi.org/10.12737/4011
Pages
from 433 to 436
STUDY OF AGGRESSIVE ENVIRONMENT ON WOOD FILLER AND THE POLYMER MATRIX
Authors
Storodubtseva Tamara, Tomilin Andrey
Status
Published
DOI
https://doi.org/10.12737/4012
Pages
from 437 to 440
INFLUENCE OF FINENESS OF WOOD PARTICLES ON DENSITY AND THE THERMAL CONDUCTIVITY OF WOOD-CHIPS BLOCKS FOR LOW-RISE BUILDING
Authors
Titova S.
Status
Published
DOI
https://doi.org/10.12737/4013
Pages
from 441 to 444
THE SCHEME OF INDUSTRIAL PLANTS FOR WASTE FOREST COMPLEX
Authors
Romancheva I., Kasimov A., Khismatov R., Tuntsev D., Savelev A.
Status
Published
DOI
https://doi.org/10.12737/4014
Pages
from 445 to 447
RESEARCH OF INFLUENCE OF A SHARE OF SODIUM SILICATE IN UREA-FORMALDEHYDE GLUE ON PHYSICAL-MECHANICAL PROPERTIES OF WOOD-BOARDS
Authors
Fedotov A. Andreevich, Ugryumov Sergey
Status
Published
DOI
https://doi.org/10.12737/4015
Pages
from 448 to 451
PROBLEM DEFINITION ON THEORETICAL RESEARCH OF WORKING PROCESS OF LOADING OF THE FELLING REMAINS BY THE MECHANISM OF LOADING OF HYDRAULIC MANIPULATOR TYPE
Authors
Fokin S., Fetyaev A.
Status
Published
DOI
https://doi.org/10.12737/4016
Pages
from 452 to 454
COMPOSITE MATERIAL COMPRISING WOOD FILLER
Authors
FilichkinaM Maria
Status
Published
DOI
https://doi.org/10.12737/4017
Pages
from 455 to 458
DEVELOPMENT OF TECHNOLOGY OF PROCESSING OF WOOD WASTE TO PRODUCE HEAT-INSULATING MATERIAL
Authors
Filippova F., Khayrullina E., Stepanov V.
Status
Published
DOI
https://doi.org/10.12737/4018
Pages
from 459 to 462
THERMOMODIFICATION CRUSHED WOOD IN THE ENVIRONMENT OF FURNACE GASES IN THE CHAMBER DISC TYPE
Authors
Kraynov A., Khasanshin R., Timerbaeva A.
Status
Published
DOI
https://doi.org/10.12737/4019
Pages
from 463 to 465
RESEARCH OF PROCESS OF UVELICHENICHENIYA OF HUMIDITY OF THE WOOD PROCESSED BY VARIOUS STRUCTURES
Authors
Chernikov E.
Status
Published
DOI
https://doi.org/10.12737/4020
Pages
from 466 to 470
MEASURES FOR THE POSSIBILITY OF COMBINATION OF THE POLYMERIC MATERIAL ON THE BASIS OF CEMENT AND WOOD
Authors
Chernikov E.
Status
Published
DOI
https://doi.org/10.12737/4021
Pages
from 470 to 473
RESEARCH OF SAWN DECORATIVE TIMBER PRODUCTION TECHNOLOGY FROM ROUND LOGS
Authors
Sharapov E., Smirnova E.
Status
Published
DOI
https://doi.org/10.12737/4022
Pages
from 474 to 478
CREATION OF WOOD ADHESIVE JOINTS OF HIGH STRENGTH
Authors
Shatilova E.
Status
Published
DOI
https://doi.org/10.12737/4023
Pages
from 479 to 482
THERMOMECHANICAL WAYS PROCESSING OF WOOD AND POLYMER WASTE
Authors
Stepanov V., Shayakhmetov F.
Status
Published
DOI
https://doi.org/10.12737/4024
Pages
from 483 to 484
OPTIMIZATION OF CUTTING LOGS ON TRAPEZIUM BOARDS
Authors
Shevchenko S., Martin I.
Status
Published
DOI
https://doi.org/10.12737/4025
Pages
from 485 to 487
PAINT MATERIALS FOR THE FURNITURE NDUSTRY
Authors
Zheltoukhova N., Novoselova Irina
Status
Published
DOI
https://doi.org/10.12737/4030
Pages
from 331 to 334
IMPROVING THE EFFICIENCY OF CUTTING LOGS WITH NARROW BAND SAWS BY REDUCING MAINTENANCE COST OF EQUIPMENT
Authors
Kiselev S., Blokhin A.
Status
Published
DOI
https://doi.org/10.12737/4031
Pages
from 357 to 360
INFLUENCE OF DRYING OF TREES ON MECHANICAL PROPERTIES OF WOOD NORWAY SPRUCE
Authors
Larinina Yu.
Status
Published
DOI
https://doi.org/10.12737/4033
Pages
from 383 to 385
Quantity of pages
0

This work is licensed under Creative Commons Attribution 4.0 International



Submit manuscript

The contact persons
Responsible secretary
Shanin Igor
anni_vgltu@mail.ru
+7 (473) 253-76-51
© anni.editorum.ru
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?