THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS

Ekaterina Kantieva; Larisa Ponomarenko; Artem Chernyaev

doi:10.12737/25205

UDC 63

THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS

Published in Forestry Engineering Journal · Volume 7, Issue 1 · Pages 150–156 · Rubric: WOOD PROCESSING. CHEMICAL TECHNOLOGY

DOI: https://doi.org/10.12737/25205

Received: 17.03.2017 Accepted: 17.03.2017 Published: 17.03.2017 Language of publication: RUS

Authors

Ekaterina Kantieva

Larisa Ponomarenko

Artem Chernyaev

Ekaterina Kantieva

Academic degree: candidate of technical sciences

Science rang: docent

Voronezh State University of Forestry and Technologies named after G.F. Morozov Head · mechanical technology of wood · Russian Federation · Voronezh

Larisa Ponomarenko

Academic degree: candidate of technical sciences

Voronezh State University of Forestry and Technologies named after G.F. Morozov Associate Professor · mechanical technology of wood · Russian Federation · Voronezh

Artem Chernyaev

Federal State Budget Education Institution of Higher Education «Voronezh State University of Forestry and Technologies named after G.F. Morozov» student · the forestry faculty · Russian Federation · Voronezh

ABSTRACT

The concept of quality in the minds of Soviet and Russian people is inextricably linked with the concept of GOST. Requirements, imposed by the standard to quality of production, does not remain constant, but change in accordance with the level of development of science, technology and best practices. The article considers dynamics of changes of requirements of GOST 10632 "Chipboards. Technical conditions" to the quality of chipboards in the last 40 years. The author analyzes the wording of this standard, approved in 1977, 1989, 2007 and 2014. For specified period of time the labeling of the plates P-A and P-B to P1, P2 has changed, which is related to the harmonization with foreign standards. In the last edition of the GOST 2014 plates have no restrictions on size, so as to replace presses periodic action, which have specific dimensions of the heating plates of the press, presses of continuous extrusion come. The same situation is with the densities of boards, the manufacturer sets its value, but the strength of the plates shall conform to the requirements of the standard. Although, strength characteristics (ultimate strength in tension perpendicular to the plate and the ultimate strength in static bending) are reduced with each new edition of GOST. Tightening of the requirements has occurred to the sanitary and hygienic indicators of chipboards. The content of free formaldehyde has decreased from 10 to 4 mg per 100 g of absolutely dry plate. To obtain competitive boards of E0 emission class Russian chemical industry needs to develop a large amount of resins with low content of free formaldehyde.

KEYWORDS

standard, quality, chipboard, index.

Text

Text (PDF)

Read Download

Многие из нас не раз слышали и, может, произносили сами юмористическое высказывание, что в России заборы строят из натуральной древесины, а мебель – из стружки.

1. Biryukov V. G. Tekhnologiya kleenykh materialov i drevesnykh plit [Technology of glued materials and wood plates] ucheb.posobie V. G. Biryukov. [studies. grant V. G. Vasechkin.] Moscow, 2012, 292 p. (In Russian).

2. Volynskiy V. N. Tekhnologiya struzhechnykh i voloknistykh drevesnykh plit [The technology of particle and fiber wood boards ] Tallin, 2004, 192 p.

3. GOST 10632 - 77. Plity drevesnostruzhechnye. Tekhnicheskie usloviya [Wood chip boards. Specifications] - Moskva, 1979, 10 p. (In Russian).

4. GOST 10632 - 89. Plity drevesnostruzhechnye. Tekhnicheskie usloviya [Wood chip boards. Specifications] - Vzamen GOST 10632 - 77; vved. 1990 - 01 - 01. [Vzamen GOST 10632 - 77; vved. 1990 - 01 - 01.] Moscow, 1997, 11 s. (In Russian).

5. GOST 10632 - 2007. Plity drevesnostruzhechnye. Tekhnicheskie usloviya (s izmeneniem № 1) [Wood chip boards. Technical specifications (amendment No. 1)] - Vzamen GOST 10632 - 89; vved. 2009 - 01 - 01. [Vzamen GOST 10632 - 89; vved. 2009 - 01 - 01.] Moscow, 2007, 19 p. (In Russian).

6. GOST 10632 - 2014. Plity drevesnostruzhechnye. Tekhnicheskie usloviya [Wood chip boards. Specifications]. - Vzamen GOST 10632 - 2007; vved. 2015 - 07 - 01. [Vzamen GOST 10632 - 2007; vved. 2015 - 07 - 01.] - Moscow, 2014, 16 p. (In Russian).

7. Razinkov E.M., Murzin V. S., Kantiyeva E. V. Tekhnologiya i oborudovanie kleenykh materialov [Technology and equipment of glued materials] Voronezh, 2013, 296 p. (In Russian). EDN: https://elibrary.ru/RETOBJ

8. Clemons, C. Wood-plastic composites in the United States: The interfacing of two industries For. Prod, 2002, no. 10, 52 p.

9. Villechevrolle V.L. Polymer blends for multi-extruded wood-thermoplastis composites: a thesis submitted for the degree of Science Washington State University, 2008, 110 p.

10. Kollman F. Einflub der Vergeschichte des Holses auf seine Verleimung Holstechnologie, Sonderhegst, 1964, pp. 27-37.

11. Maderthaner W. A. und J. B. Verbestel. Formaldehydarme Spanplatten durch Gasbehandlung. Ein Verfahren zur Verringerung der Formaldehydabgabe fertiggepresster Holzwerkstoffplatten. Holz-Zentralblatt 107, 1980, pp. 1917-1918.

This work is licensed under Creative Commons Attribution 4.0 International

PDF Text JATS XML

Editor-in-Chief

Nataliya yakovenko

n.v.yakovenko71@gmail.com +7(919)188-92-32

5518

downloads

This work is licensed under Creative Commons Attribution 4.0 International Creative Commons

GOST

Kantieva E. V., Ponomarenko L. V., Chernyaev A. E. THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS // Forestry Engineering Journal. 2017. no. 1. pp. 150-156. DOI: https://doi.org/10.12737/25205. (Date of access 26.09.2026).

MLA

Ekaterina Kantieva, Ponomarenko L. V., Chernyaev A. E.. "THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS." Forestry Engineering Journal 7.1 (2017): 150-156. DOI: https://doi.org/10.12737/25205.

APA

Kantieva E. V., Ponomarenko L. V., Chernyaev A. E. (2017). THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS. Forestry Engineering Journal, 7(1), 150-156. https://doi.org/10.12737/25205

Chicago

Ekaterina Kantieva, Ponomarenko L. V., Chernyaev A. E.. "THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS." Forestry Engineering Journal 7, no. 1 (2017): 150-156. https://doi.org/10.12737/25205.

WIKI

{{cite journal | author = Kantieva E. V., Ponomarenko L. V., Chernyaev A. E. | title = THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS | journal = Forestry Engineering Journal | year = 2017 | volume = 7 | issue = 1 | pages = 150-156 | doi = 10.12737/25205 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

THE IMPACT OF MODERN TECHNOLOGY ON THE STANDARD REQUIREMENTS TO THE QUALITY OF CHIPBOARDS

Confirmation